Have you noticed that your ceramic floor tiles have been appearing a touch foggy recently? Do you recall the way they looked once they were installed in your home? Do you want that gleaming radiance back? Ceramic floor tiles, on the other hand, are not difficult to keep clean correctly. Using the appropriate approach and cleaning materials, you can have your floor looking as good as new in no time at all.
Instructions for Cleaning Ceramic Floor Tiles at a Basic Level
Ceramic floor tiles are quite popular because it requires less care and is stain and filth-resistant. Over time, though, the details might get a bit foggy. It simply takes a few basic materials and ingredients to restore that gleaming luster.
Water, baking soda, detergent or mild dish soap, a 5-gallon bucket, a microfiber cloth, and optionally, lemon juice are all needed for this project.
- Sweep the floor with a brush and dustpan or vacuum it to remove as much dirt and debris as possible.
- Fill the bucket halfway with hot water.
- Add a few drops of mild detergent or dish soap to the water. Keep in mind that you want to remove the scum or oil from the floor without leaving a soapy residue on the surface. As a result, a little bit goes a long way.
- Mop the floor with the mop once it has been dipped in the water. It is not necessary to make it overly wet; rather, the goal is to merely remove the dirt. The floor should be dried and buffed with the microfiber cloth in step
- This will aid in the prevention of water marks and streaks.
The floor may seem blurry if the amount of soap used was a bit excessive. If this is the case, just wet a cloth with lemon juice and wipe over the floor tiles. According to the Council of North America, it is best to avoid using lemon juice on grout since the acid in the lemon juice may react with the grout (TCNA)
Getting Rid of Stubborn Stains on Ceramic Floor tiles
If you have stains that are difficult to remove, you may need to try a different technique. You’ll need the following items to complete this task:
- Baking soda
1. Make a paste by mixing the baking soda and water together. You want it to be a touch on the thicker side, but not too much.
2. Apply the mixture to the area that has been contaminated. Allow it to rest for a minute or two to allow the stain to soak.
3. Using the microfiber cloth, gently scrubbing circles on the floor tiles while moving the baking soda mixture around and gently washing the area is recommended.
4. Thoroughly rinse with water after each use. Because baking soda may leave a film on surfaces, be sure to completely rinse after using it.
5. Buff the affected area with a dry cloth.
Tip: You may also use this approach to clean small areas of the carpet.
Ceramic floor tiles mops are the best
When cleaning ceramic floor tiles, a spin mop, a rag mop, or a chamois mop are the most effective options. These are the most effective at preventing dirt from leaking into the grout.
- If at all feasible, a sponge mop should be avoided. Grout is dulled as a result of the dirt left behind by rubber mops. As a result, they are not a good choice for this sort of flooring.
- A towel may also be used to clean ceramic floor tiles, if necessary. To clean floors, a towel is not the best option since it will force you to go down on your hands and knees to scrub. A rag mop may be used on floors in the same way as a towel, but it will be easier on your knees. Cleaning ceramic floor tiles in the shower with a towel is the recommended method.
Factors to Consider When Purchasing Cleaning Products
According to the Ceramic Floor Tile and Stone Association (TCNA), if you prefer to use a professional cleaning product on your ceramic floor tiles, pick one that is alkaline rather than acidic. Acidic cleaners, like as Pine-Sol, have the potential to attack and break down grout. As a result, alkaline cleansers, such as Mr. Clean floor cleaner, are the most effective on this sort of flooring.
NOTE: Acidic products are those that may be used to remove rust or calcium deposits from surfaces.
Now that you know how to clean your ceramic floor tiles and what products to use, follow these guidelines to maintain your floors looking their best.
- Change your wash-water frequently. This will prevent stains and smudges from dirty water from being re-applied to the floor after cleaning.
- If the floor isn’t too dirty, you may just mop it with water to prevent leaving residue. Simply use baking soda to clean any spills or messes as required.
- When it comes to cleaning products, less is more. Using the bare minimum to get the clean you want will guarantee that you do not leave a residue on the surface.
- When cleaning ceramic floor tiles, avoid using oil-based cleansers. These will make the floor very slippery, and they will leave a residue that is difficult to remove.
Using the Services of a Professional
A floor restoration professional may be necessary if your terrazzo floor has lost its sheen or has stains that are difficult to remove with regular washing. A professional will be able to not only correctly remove the sealer from the floor and reapply it, but they will also be able to efficiently polish the floor’s surface using commercial equipment to restore the floor’s original sheen and luster.
If you aren’t familiar with the many kinds of flooring, hiring expert floor cleaners is a safe and effective approach to guarantee that your floor looks it’s very best. Many cleaners will provide you with free estimates or will have an online price list, which will help you to determine whether or not their services are within your budget.
Maintaining the Cleanliness
You should clean your terrazzo floor tiles using an appropriate cleaner that has been formulated specifically for the flooring type in question. This is due to the fact that all-purpose cleansers and acids might cause harm to your flooring. Visit http://minimaldomesticity.com/floor-tiles-maintenance-tips-thatll-save-you-money/ to read about Floor tiles maintenance tips that’ll save you money.